Training Syllabus:
RISK BASED INSPECTION (RBI)
INTRODUCTION:
Risk-Based Inspection is a systematical process that identifies, assesses and map industrial risks, which can compromise equipment integrity in both pressurized equipment and structural elements. The high risk equipments are then managed by a proper inspection interval, method and coverage. In the RBI philosophy, it is more cost- effective to allow some systems to fail as long as the consequences of the failure are low, on the other hand, some systems may have such high consequences of failure that failure is totally unacceptable, and therefore, these items should receive most attention by using a proper inspection plan & practice. In this course API 581 and API 580 and other DNV and ABS guidelines and recommended practices, will be consulted.
TRAINING MATERIAL OUTLINE :
1. Defining boundary system to be assessed
2. Screening operating unit within a plant to identify area of high risk.
3. Identifying the damage mechanism operative
4. Determining the technical module sub-factor and likelihood of failures
5. Determining the hazard areas and consequence of failure
6. Estimating a risk value of each equipment, tabulated and ranked
7. Prioritizing the equipment maintenance based on a the measured risk
8. Designing an appropriate inspection program.
9. Systematically managing the risk equipment failures.
TRAINING BENEFIT :
Increased knowledge of equipment which may pose a potential risk.
More reliable equipment and plant operation.
Increased safety.
Cost optimization through switching to non-invasive inspection techniques.
Possibility to tailor shutdown scope.
Option to extend run lengths where applicable national regulations permit it.
Increased teamwork during the implementation process.
Development of a knowledge database including equipment design, process features, damage mechanisms and inspection strategies
WHO SHOULD ATTEND THIS TRAINING?
Plant and Pipeline Operators, Supervisors, Engineers and Manager or every one who should know this topic.
VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll
TRAINING DURATION : 3 days
WAKTU TRAINING :
Januari 2024 | Februari 2024 | Maret 2024 | April 2024 |
3 – 5 Januari 2024 | 5 – 7 Februari 2024 | 4 – 6 Maret 2024 | 1 – 3 April 2024 |
8 – 10 Januari 2024 | 12 – 14 Februari 2024 | 12 – 14 Maret 2024 | 22 – 24 April 2024 |
15 – 17 Januari 2024 | 19 – 21 Februari 2024 | 18 – 20 Maret 2024 | 29 April – 1 Mei 2024 |
22 – 24 Januari 2024 | 26 – 28 Februari 2024 | 25 – 27 Maret 2024 | |
29 – 31 Januari 2024 | |||
Mei 2024 | Juni 2024 | Juli 2024 | Agustus 2024 |
6 – 8 Mei 2024 | 3 – 5 Juni 2024 | 1 – 3 Juli 2024 | 5 – 7 Agustus 2024 |
13 – 15 Mei 2024 | 10 – 12 Juni 2024 | 8 – 10 Juli 2024 | 12 – 14 Agustus 2024 |
20 – 22 Mei 2024 | 19 – 21 Juni 2024 | 15 – 17 Juli 2024 | 19 – 21 Agustus 2024 |
27 – 29 Mei 2024 | 24 – 26 Juni 2024 | 22 – 24 Juli 2024 | 26 – 28 Agustus 2024 |
29 – 31 Juli 2024 | |||
September 2024 | Oktober 2024 | November 2024 | Desember 2024 |
2 – 4 September 2024 | 1 – 3 Oktober 2024 | 4 – 6 November 2024 | 2 – 4 Desember 2024 |
9 – 11 September 2024 | 7 – 9 Oktober 2024 | 11 – 13 November 2024 | 9 – 11 Desember 2024 |
16 – 18 September 2024 | 14 – 16 Oktober 2024 | 18 – 20 November 2024 | 16 – 18 Desember 2024 |
23 – 25 September 2024 | 21 – 23 Oktober 2024 | 25 – 27 November 2024 | 26 – 28 Desember 2024 |
28 – 30 Oktober 2024 |
HARGA INVESTASI/PESERTA :
1. Rp. 6.950.000/peserta (bayar penuh) atau
2. Rp. 6.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
3. Rp. 6.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)
FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor