SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

Training Syllabus:
SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

INTRODUCTION:
SCADA has traditionally meant a window into the process of a plant and / or a method of gathering of data from devices in the field. Today, the focus is on integrating this process data into the actual business, and using it in real time. In addition to this, today’s emphasis is on using Open Standards, such as communication protocols (eg IEC 60870, DNP3 and TCP/IP) and ‘off-the-shelf’ hardware and software, as well as focusing on keeping the costs down. PLCs continue to gain in popularity. In fact, many SCADA applications use PLCs as the RTU of choice, when communicating with field devices. This comprehensive course covers the essentials of SCADA and PLC systems, which are often used in close association with each other.

TRAINING OBJECTIVE:
After completing this course, the participants should be able to understand the concepts of SCADA Systems, build and configure the MTU and RTU modules, program the MTU and RTU, use sequential and PID controller implementation of MTU and RTU. Input/Output communication to get RTU data, set up polling and exception report of MTU/RTU, link the TU/RTU with Supervisory Computer and use Human Machine Interface (HMI) to optimize the operation of SCADA System.

TRANING MATERIAL OUTLINE:
1. Concept of SCADA System
2. Software and Hardware of SCADA System
3. MTU/RTU Configuration Set-up
4. MTU/RTU Communication
5. MTU/RTU Ladder Logic Programming
6. Logic and Sequential Programming
7. MTU/RTU PID controller Programming
8. MTU/RTU Data Logging
9. MTU/RTU Exception Reporting
10. MTU/RTU System Redundancy
11. Input/Output Server and HMI System
12. HMI Operation and Programming
13. Comprehensive Practice

TRAINING METHODES:
1. Tutorial
2. Discussion
3. Practice

FACILITIES USED:
1. PLC
2. Software and Hardware of SCADA System
3. Miniature Plant
4. HMI Panel
5. MTU/RTU

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :

Januari 2024 Februari 2024 Maret 2024 April 2024
2 – 5 Januari 2024 5 – 8 Februari 2024 4 – 7 Maret 2024 1 – 4 April 2024
8 – 11 Januari 2024 12 – 15 Februari 2024 12 – 15 Maret 2024 22 – 25 April 2024
15 – 18 Januari 2024 19 – 22 Februari 2024 18 – 21 Maret 2024 29 April – 2 Mei 2024
22 – 25 Januari 2024 26 – 29 Februari 2024 25 – 28 Maret 2024
29 Jan – 1 Feb 2024
Mei 2024 Juni 2024 Juli 2024 Agustus 2024
6 – 9 Mei 2024 3 – 6 Juni 2024 1 – 4 Juli 2024 5 – 8 Agustus 2024
13 – 16 Mei 2024 10 – 13 Juni 2024 8 – 11 Juli 2024 12 – 15 Agustus 2024
20 – 23 Mei 2024 19 – 22 Juni 2024 15 – 18 Juli 2024 19 – 22 Agustus 2024
27 – 30 Mei 2024 24 – 27 Juni 2024 22 – 25 Juli 2024 26 – 29 Agustus 2024
29 Juli – 1 Agustus 2024
September 2024 Oktober 2024 November 2024 Desember 2024
2 – 5 September 2024 1 – 4 Oktober 2024 4 – 7 November 2024 2 – 5 Desember 2024
9 – 12 September 2024 7 – 10 Oktober 2024 11 – 14 November 2024 9 – 12 Desember 2024
16 – 19 September 2024 14 – 17 Oktober 2024 18 – 21 November 2024 16 – 19 Desember 2024
23 – 26 September 2024 21 – 24 Oktober 2024 25 – 28 November 2024
28 – 31 Oktober 2024

INVESTMENT PRICE/PERSON :
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flashdisk contain training material
3. Certificate
4. NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Foto
8. Training room with full ac facilities and multimedia
9. Lunch and twice coffee break everyday of training
10. Qualified Instructor